jennyfur

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 159 total)
  • Author
    Posts
  • in reply to: Re: Review: Ceton InfiniTV 4 Quad CableCARD Tuner – Part I #311
    jennyfur
    Participant

      [quote=”joao12345″]how many gigs of storage?
      I wanted to buy a plain vanilla xbox arcade which to my knowledge has almost no storage and little ram…
      [/quote]
      What do you need storage for? Unless you plan on doing some heavy gaming with the arcade, it’s unnecessary. My largest game save file is only 2.8gb, and I’d bet that could easily fit on any USB flash drive you have lying around the house. It may take a little longer to load things, but that’s the only downside I could see. My avatar is only like 8mb. Gamerpics are insignificant in size, and I doubt you’d be on the dashboard enough to warrant downloading extra themes or videos or whatever.

      I don’t believe the amount of ram has changed at all. They just switched to a smaller process for everything (45nm I believe) and integrated the CPU, GPU, and eDRAM onto a single chip to make it more efficient and less hot.

      in reply to: Review: Ceton InfiniTV 4 Quad CableCARD Tuner – Part I #27204
      jennyfur
      Participant

        [quote=”joao12345″]how many gigs of storage?
        I wanted to buy a plain vanilla xbox arcade which to my knowledge has almost no storage and little ram…
        [/quote]
        What do you need storage for? Unless you plan on doing some heavy gaming with the arcade, it’s unnecessary. My largest game save file is only 2.8gb, and I’d bet that could easily fit on any USB flash drive you have lying around the house. It may take a little longer to load things, but that’s the only downside I could see. My avatar is only like 8mb. Gamerpics are insignificant in size, and I doubt you’d be on the dashboard enough to warrant downloading extra themes or videos or whatever.

        I don’t believe the amount of ram has changed at all. They just switched to a smaller process for everything (45nm I believe) and integrated the CPU, GPU, and eDRAM onto a single chip to make it more efficient and less hot.

        in reply to: Re: So my Harmony died today #437
        jennyfur
        Participant

          So I got a response from Logitech. They suggest I try a firmware update. After updating the firmware, 2 of the 4 buttons started working again. The other two are doing something, just not what they’re assigned to (one makes media center respond with the error noise, the other made menus such as music page left). That’s better than not working at all like they had been. Maybe I can avoid buying a new remote with just a little rearranging of activities and custom buttons to the working side. Or maybe if I just keep updating the thing, it will eventually put the right configuration on those two remaining buttons. I’m so glad it’s not completely dead! Guess those Best Buy coupons won’t be needed.

          Well, all you other Harmony owners now know to try updating the firmware when stuff stops working. In the Harmony software, go to downloads. There’s a firmware button there. You’ll have to update the remote again after that’s done. Possibly more than once.

          I’ve updated 4 times now and although it seemed the other 2 buttons were finally working, the [i]remote is actually changing the commands they send at random[/i]. Wuuut?!?! One press and it was the xbox dashboard. Another press and it was the main DVD menu. Another and it was scrolling. Not acceptable. I guess those 2 buttons are done for good. But the other 2 still seem fine for now.

          in reply to: So my Harmony died today #27325
          jennyfur
          Participant

            So I got a response from Logitech. They suggest I try a firmware update. After updating the firmware, 2 of the 4 buttons started working again. The other two are doing something, just not what they’re assigned to (one makes media center respond with the error noise, the other made menus such as music page left). That’s better than not working at all like they had been. Maybe I can avoid buying a new remote with just a little rearranging of activities and custom buttons to the working side. Or maybe if I just keep updating the thing, it will eventually put the right configuration on those two remaining buttons. I’m so glad it’s not completely dead! Guess those Best Buy coupons won’t be needed.

            Well, all you other Harmony owners now know to try updating the firmware when stuff stops working. In the Harmony software, go to downloads. There’s a firmware button there. You’ll have to update the remote again after that’s done. Possibly more than once.

            I’ve updated 4 times now and although it seemed the other 2 buttons were finally working, the [i]remote is actually changing the commands they send at random[/i]. Wuuut?!?! One press and it was the xbox dashboard. Another press and it was the main DVD menu. Another and it was scrolling. Not acceptable. I guess those 2 buttons are done for good. But the other 2 still seem fine for now.

            in reply to: Re: Blog: I bought a new HDTV…and it`s not 3D #205
            jennyfur
            Participant

              [quote=”Mikinho”]
              For gaming I feel like past 32″ makes it more difficult.  At least for Call of Duty and other first person shooters.  That said 32″ is too small for the primary home theater TV.
              [/quote]
              Hmm can’t comment on that one, my FPS are all on my 22″ computer monitor that I’m sitting 2′ from. However I play a ton of third person shooters on my 50″ TV and that’s not a problem, I like the size and it’s good for movies and such too.

              in reply to: Blog: I bought a new HDTV…and it`s not 3D #27102
              jennyfur
              Participant

                [quote=”Mikinho”]
                For gaming I feel like past 32″ makes it more difficult.  At least for Call of Duty and other first person shooters.  That said 32″ is too small for the primary home theater TV.
                [/quote]
                Hmm can’t comment on that one, my FPS are all on my 22″ computer monitor that I’m sitting 2′ from. However I play a ton of third person shooters on my 50″ TV and that’s not a problem, I like the size and it’s good for movies and such too.

                in reply to: Re: So my Harmony died today #436
                jennyfur
                Participant

                  [quote=”phoneguyinpgh”]
                  A nice thing about the Harmony One is that your configuration is saved on-line.  So if your One dies and you replace it, you can just load your old configuration (channel logos and all) into the new remote.
                  [/quote]
                  It’s the same way with all harmony remotes. I’ve already gone through 2 different models with the same saved configuration (a 670 and a 550) and intend to do the same with whatever new one I end up getting.

                  in reply to: So my Harmony died today #27324
                  jennyfur
                  Participant

                    [quote=”phoneguyinpgh”]
                    A nice thing about the Harmony One is that your configuration is saved on-line.  So if your One dies and you replace it, you can just load your old configuration (channel logos and all) into the new remote.
                    [/quote]
                    It’s the same way with all harmony remotes. I’ve already gone through 2 different models with the same saved configuration (a 670 and a 550) and intend to do the same with whatever new one I end up getting.

                    in reply to: Re: So my Harmony died today #433
                    jennyfur
                    Participant

                      Hmm I take that back. Found a larger picture and the buttons all look like they’re plastic. Darn.

                      And to make matters more complicated, there’s a $10 rebate on the 650 at Amazon that’s only good until tomorrow. That would make it a couple bucks less than Best Buy.

                      in reply to: So my Harmony died today #27321
                      jennyfur
                      Participant

                        Hmm I take that back. Found a larger picture and the buttons all look like they’re plastic. Darn.

                        And to make matters more complicated, there’s a $10 rebate on the 650 at Amazon that’s only good until tomorrow. That would make it a couple bucks less than Best Buy.

                        in reply to: Re: So my Harmony died today #432
                        jennyfur
                        Participant

                          [quote=”frijones”]
                          Since you liked your 550 so much, why not just get another one.  Just got a deal from Newegg for a refurb 550.

                          [url=http://www.newegg.com/Product/Product.aspx?Item=N82E16880111010&nm_mc=EMC-IGNEFL081310&cm_mmc=EMC-IGNEFL081310-_-EMC-081310-Index-_-UniversalRemotes-_-80111010-L07D]http://www.newegg.com/Product/Product.aspx?Item=N82E16880111010&nm_mc=EMC-IGNEFL081310&cm_mmc=EMC-IGNEFL081310-_-EMC-081310-Index-_-UniversalRemotes-_-80111010-L07D[/url]

                          It’s $49.99 shipped with this code: EMCYWZP53
                          [/quote]
                          Haha I was just coming here to post that! Slickdeal alert tipped me off. Problem is, that’s recertified. I’ve already had bad luck with a new one, I’m kinda hesitant to go refurb. I paid that much for it brand new a year and a half ago.

                          In the meantime, a friend is letting me borrow his xbox media remote that he never uses, so at least I don’t have to use a friggin’ gamepad to navigate everything anymore. I love how it has such soft, squishy buttons (the 4-way directional and OK button on the 550 were hard plastic buttons and really uncomfortable to use). Judging by the pictures of the 600/650, I think ALL the buttons are the rubbery squishy type thankfully. Still no response from Logitech though. I checked the best buy coupons and they’re good until the 16th so I’m gonna wait to hear from Logitech until the last possible minute.

                          in reply to: So my Harmony died today #27320
                          jennyfur
                          Participant

                            [quote=”frijones”]
                            Since you liked your 550 so much, why not just get another one.  Just got a deal from Newegg for a refurb 550.

                            [url=http://www.newegg.com/Product/Product.aspx?Item=N82E16880111010&nm_mc=EMC-IGNEFL081310&cm_mmc=EMC-IGNEFL081310-_-EMC-081310-Index-_-UniversalRemotes-_-80111010-L07D]http://www.newegg.com/Product/Product.aspx?Item=N82E16880111010&nm_mc=EMC-IGNEFL081310&cm_mmc=EMC-IGNEFL081310-_-EMC-081310-Index-_-UniversalRemotes-_-80111010-L07D[/url]

                            It’s $49.99 shipped with this code: EMCYWZP53
                            [/quote]
                            Haha I was just coming here to post that! Slickdeal alert tipped me off. Problem is, that’s recertified. I’ve already had bad luck with a new one, I’m kinda hesitant to go refurb. I paid that much for it brand new a year and a half ago.

                            In the meantime, a friend is letting me borrow his xbox media remote that he never uses, so at least I don’t have to use a friggin’ gamepad to navigate everything anymore. I love how it has such soft, squishy buttons (the 4-way directional and OK button on the 550 were hard plastic buttons and really uncomfortable to use). Judging by the pictures of the 600/650, I think ALL the buttons are the rubbery squishy type thankfully. Still no response from Logitech though. I checked the best buy coupons and they’re good until the 16th so I’m gonna wait to hear from Logitech until the last possible minute.

                            in reply to: Re: Anyone going to see The Expendables? #492
                            jennyfur
                            Participant

                              I am all about seeing this! Just for the cast alone, I haven’t even bothered with the reviews. But now I’m not sure when I can fit it in my schedule, so it may be a few days before I can see it instead of opening weekend.

                              in reply to: Anyone going to see The Expendables? #27379
                              jennyfur
                              Participant

                                I am all about seeing this! Just for the cast alone, I haven’t even bothered with the reviews. But now I’m not sure when I can fit it in my schedule, so it may be a few days before I can see it instead of opening weekend.

                                in reply to: Re: So my Harmony died today #428
                                jennyfur
                                Participant

                                  Submitted again and this time it went through. Auto-reply states one business day for a response, so hopefully I should hear from them before the weekend when the Best Buy coupon is valid.

                                Viewing 15 posts - 106 through 120 (of 159 total)