Need quiet cpu cooler for socket 1156

9 posts / 0 new
Last post
Offline
Joined: 10 Sep 2010
Need quiet cpu cooler for socket 1156

I am running an i7-860 with stock heat sink fan.  It is sort of loud.  You can easily hear it whirring as it goes up and down in speed.  I am looking for a quiet solution. 

I have read of slowing down the stock fan and purchasing new a heatsink and fan.  Can someone here offer some guidance?

skirge01's picture
Offline
Joined: 21 Dec 2006

SJMaye wrote:

I am running an i7-860 with stock heat sink fan.  It is sort of loud.  You can easily hear it whirring as it goes up and down in speed.  I am looking for a quiet solution. 

I have read of slowing down the stock fan and purchasing new a heatsink and fan.  Can someone here offer some guidance?

The quietest setups tend to be the tower heatsinks, like the Thermalright Ultra-120.  But, I don't know what kind of case you're putting this in, so it may not fit.

Server: WHS, SuperMicro dual Xeon X7DWE, 1 x Xeon L5410, Thermalright HR-01, 4GB Crucial ECC, 8 port PCI-X SATA, 4 port RocketRAID 2300, 5x1 PortMultiplier, Corsair HX1000W PSU, Lian-Li PC343B case [blog]
Storage:
2 x Addonics 5-in-3 bays, 13TB
Client:
SageTV 7, Windows 7 64-bit, Foxconn G9657MA-8EKRS2H, Core2Duo E6600, Zalman CNPS7500, 2GB Corsair, 320GB, HIS ATI 4650, Antec Fusion [blog]
Tuners: 2 x HD-PVR (serial control), 2 x HDHR, USB-UIRT

Aaron Ledger's picture
Offline
Joined: 6 Aug 2010

You can control the fan using either motherboard BIOS settings (if your BIOS supports it) or a program like SpeedFan. The problem with this approach in your situation though is that if the fan is speeding up under load, it is necessary to cool the CPU down so preventing that from occurring with altered fan settings will potentially damage the CPU.

That means you really need to get a better cooler. I generally like tower style heat sinks with big fans since they can spin slowly and still keep the CPU cool. Depending on your case, there may be some size restrictions. Also, if going with a tower cooler, there is usually a backplate to sit against the motherboard to prevent flex and help support the large cooler. This means you either have to have a cutout access to the back of the motherboard or will need to remove it for installation.

There are other options too. You need to understand what your case can support and whether you want one with backplate or push-pin.

Senior Editor | @swoon_

Offline
Joined: 10 Sep 2010

This is my case http://www.origenae.co.kr/en/htpc_s21t.htm

There is plenty of room with the exception of the DVD drive almost directly above the cooler.

As for alternatives I would like to use the pins to avoid pulling out the motherboard to install backing plate.  Is it possible the OEM fan is just cheap and noisier than most?

Aaron Ledger's picture
Offline
Joined: 6 Aug 2010

Check your dimensions and take a look at something Scythe Big Shuriken or Shuriken.

Yes, OEM HSF is small and thus noisier than many higher performance offerings. Due to heatsink construction, the fan must spin faster to reach an appropriate cooling level which causes more noise.

Senior Editor | @swoon_

Offline
Joined: 10 Sep 2010

That one looks good.  I saw the review of a look alike posted in June here on MR.  I believe that will work for me.

 

I will check dims, but I feel certain it will work.

Offline
Joined: 10 Sep 2010

Aaron Ledger wrote:

Check your dimensions and take a look at something Scythe Big Shuriken or Shuriken.

Appears the Scythe Big Shuriken will work.  I purchased one online.  Will report back with results an pics.

Offline
Joined: 10 Sep 2010

Back.  I received and now installed the new cpu cooler.  Happy to say it is dead silent.

Original Intel

 

New Scythe Big Shuriken

The only issues with the install are the plastic pins are difficult to reach under the radiator and fan. Also, the radiator fins extend over top of one of my ram sticks.  If I want to change or add ram I will need to remove this.

It is quiet though.  Very happy.  Thanks for the recommendation.

Aaron Ledger's picture
Offline
Joined: 6 Aug 2010

It looks great. I am glad it worked out for you. It appears that you might still be able to remove and install memory w/o removing the cooler. You can put the stick in at an angle up to a point.

Senior Editor | @swoon_

Login or register to post comments
Website design by Yammm Software
Powered by Drupal